9 woods footprints · 4"x8" to 30"x19" · Works with your trees, or without any!

Trees are the bulkiest, most fragile, most expensive terrain most players own, and a decent wood needs a lot of them. This sheet gives you the woods without the forest.

Nine woodland areas printed on FeltPro™ material, drawn as canopy seen from above — treetops, gaps, shaded ground and worn dirt paths beneath. Cut them out, lay them on your mat, and you have area terrain with a defined edge. It reads as woods on its own.

Add your own trees on top if you have them. Three or four stands scattered across a printed wood look like a forest. The same stands on bare cloth look like three or four trees.

• 9 pieces in 4 sizes, 4"x8" up to 30"x19"
• Over 1,250 sq in of woodland — a third of a 4'x6' table
• Cut with household scissors or circular cloth cutter.
• Cut to the printed outline or any shape you like
• Rolls up with your mat; no dedicated storage
• Drawn for 28mm, reads correctly 15mm–32mm, also usable at 10mm and 6mm

Cut them however you want!

The printed outlines are a starting point, not a pattern. Cut inside them, across them, or ignore them entirely.

• Trim a copse into a crescent to wrap a hilltop
• Slice the large wood into strips for hedgerows and windbreaks
• Cut a clearing out of the middle of a mid-size piece for an objective
• Square off an edge to run a wood against a road or river
• Split one large piece into six irregular fragments of broken scrub

• 4 copses, ~4" x 8" — a stand of two or three trees. Field corners, the end of a hedgerow, a scrap of cover worth fighting over.
• 2 small woods, ~9" x 13" — enough for a squad to disappear into, small enough to flank.
• 2 mid woods, ~16" x 10" — a real feature that breaks line of sight across a table quarter.
• 1 large wood, ~30" x 19" — spans a full 30" table edge. A forest edge along a deployment zone, or the centrepiece everyone has to enter.

The mix is deliberate. Butt the two 16" pieces against the large one and you get a continuous forest edge running two-thirds of a table. Ring the copses around an empty space and you get broken scrub instead. Four sizes and cut&play freedom means a different wood every game.

Like all our Cut & Play pieces, these lie flat on your FeltPro™ mat and follow the contours of whatever's underneath.

Put a riser beneath your FeltPro™ base mat — foam, a hardback, a stack of magazines — and the mat drapes over it to make a real slope. The woodland piece then drapes over that, so a wood on a hillside genuinely sits on the hillside: the ground rises through the trees, models stand at a grade, and the crest breaks line of sight. Rigid plastic and MDF templates can't do this.

The same flexibility means trees come off and go back on freely. Lift a tree aside to place a squad inside the wood, and the printed footprint still marks the area for cover and movement. And because it's the same material as every other Cut & Play sheet, these woods will match your roads, rivers and other Cut & Play pieces.

Care instructions
- Machine wash separately: cold (max 30C or 90F), gentle cycle
- Do not bleach
- Tumble dry: low heat
- Do not iron
- Do not dryclean

EU representative: HONSON VENTURES LIMITED, gpsr@honsonventures.com, 3, Gnaftis House flat 102, Limassol, Mesa Geitonia, 4003, CY

Product information: Generic brand, 2 year warranty in EU and Northern Ireland as per Directive 1999/44/EC

Warnings, Hazard: For adults, Blank product sourced from the United Kingdom

Care instructions: Machine wash separately: cold (max 30C or 90F), gentle cycle, Do not bleach, Tumble dry: low heat, Do not iron, Do not dryclean